Ridge Mountain Gear Basic Short Sleeve Shirt
Material: 100% polyester
Color: Sage Green / Coast Grey / Tawny Brown / Indigo Blue
Size:
(Men) S, M, L, XL
(Women) S, M, L
Weight: Men / M Approx. 185g
Country of Origin: Japan
Producer: 青森県黒石市 有限会社ファッション工房黒石
Introduction
RIDGE MOUNTAIN GEAR "Basic" line shirt.
There is a product called "Basic Cap". The brand owner Yusuke Kurosawa aimed to make this shirt that he would like to wear all year long.
The concept of RIDGE MOUNTAIN GEAR is "Do not separate everyday life from mountains". The “Basic Long Sleeve Shirt” could be fully deliver such concept. We would appreciate if you could add this shirt to the "Basic" outfit.
Material
This product uses COOL DOTS®, which has 4-way stretch (stretch both vertically and horizontally). COOL DOTS® is a high-performance material developed by Komatsu Matere Co., Ltd. that is made of 100% polyester with countless microscopic air holes and has excellent stretch and breathability.
*This is a lighter and more advanced material with smaller micropores than the COOL DOTS® used in the Poly Basic Long Sleeve Shirt, which was sold until 2022.
Excellent breathability has been achieved through a special weaving method that creates numerous micropores. It maintains excellent breathability from the inside of the shirt while reducing the sense of transparency when worn.
"Stretchy/Lightweight"
It uses two types of special stretch yarns with different shrinkage rates to achieve high stretchability in all 360° directions. Not only is it lightweight at 104g/㎡, but it also has high wrinkle resistance. Even if it is crumpled and stuffed into a backpack pocket, it quickly recovers its shape.
"Quick drying and UV protection"
The quick-drying feature that dries quickly even if it gets wet is an important feature when hiking, and of course this fabric also has this feature. In addition, it also has UV protection.
"Durability"
Friction test in dry and wet conditions.
"Environmental Consideration"
Lycra T400® fiber, a plant-derived thread, is used in part of the stretch system.
Design
Yusuke Kurosawa tried to create a basic design that can be worn everyday without any discomfort. It has a relaxing silhouette that is moderately away from the body line. It's a shirt with a simple design, but with fine details.
“Round edge”
It is easily affected by wear, so Yusuke Kurosawa designed it to eliminate sharp edge as much as possible.
“Top collar”
It is also assumed to be worn with the upper collar up. The top collar design can reduces the stress that the tip of the collar hits the neck as much as possible.
“Chest pocket body and flap edge”
These parts are made into as small a round shape as possible. These places usually have sharp edges. Therefore, it is susceptible to wear and tear, and fraying is often noticeable. It is made into a small round to prevent wear even a little. Yusuke san is very careful when sewing small rounds. The pitch of the seams is reduced, which requires more hand movements, and it is very difficult to get a nice finish.
“Small collar set ”
The base collar and upper collar of this shirt are low and small. The pattern is set so that the upper collar sticks to the neck line when worn with the upper collar upright.
“Sleeves with momentum in the armpits”
The armholes are large enough to secure enough momentum at the side when raising the arms.
“Folding stitch”
All seams are sewn with felled seams. The felled seam is a method of sewing by folding the fabric so that the edge seam allowance is not visible. It takes a lot of time and effort to sew, but it is durable. On the other hand, if the seam allowance is processed with a lock sewing machine, nails may get caught in the thread, which may lead to unraveling.
“Snap button”
All buttons use resin snap buttons (YKK PLANCER®). You don't have to worry about losing the button due to thread breakage like with normal sewing buttons.
“Hanger loop”
A hanger loop is provided at the base of the back collar band. The hanger loop is a traditional shirt detail.
“Countermeasure against static electricity”
A special discharge tape is sewn into the garment to suppress the static electricity that tends to occur with clothing made of thin chemical fibers (nylon, polyester, etc.). (*From “Poly Basic Long Sleeve Shirt” which will be on sale from 2023)
Discharge tape was developed as a measure to reduce electrostatic voltage that has a negative effect on the human body. Discharge tape does not prevent static electricity, but by lowering the static voltage through discharge, it prevents the discomfort caused by static electricity. By installing it, it will not interfere with equipment such as mobile phones and computers. What's more, it has the effect of keeping pollen and dust out of the vicinity during discharge.
Collaborator
The factory that produces RIDGE MOUNTAIN GEAR shirts is Fashion Kobo Kuroishi Co., Ltd. Fashion Studio Kuroishi is a factory with about 50 employees located in Kuroishi City, Aomori Prefecture. Established in 2004. It is a factory that specializes in sewing shirts, and sews shirts from famous domestic manufacturers throughout the year. It produce about 60,000 shirts per year.
Attention
There is no big difference in the overall silhouette between the men's size (Men) and the women's size (Women), but the women's size (Women) has a silhouette that more closely matches the body shape of women, such as length and sleeve length.
This product can be used for a long time if you pay attention to the following care guide.
・ Please use a neutral detergent for washing.
・ Put the product inside out and put it in the laundry net.
・ The water temperature is limited to 40 ℃, and please avoid washing with boiling water.
・ Avoid tumble drying.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Material: 100% polyester
Color: Sage Green / Coast Grey / Tawny Brown / Indigo Blue
Size:
(Men) S, M, L, XL
(Women) S, M, L
Weight: Men / M Approx. 185g
Country of Origin: Japan
Producer: 青森県黒石市 有限会社ファッション工房黒石
Introduction
RIDGE MOUNTAIN GEAR "Basic" line shirt.
There is a product called "Basic Cap". The brand owner Yusuke Kurosawa aimed to make this shirt that he would like to wear all year long.
The concept of RIDGE MOUNTAIN GEAR is "Do not separate everyday life from mountains". The “Basic Long Sleeve Shirt” could be fully deliver such concept. We would appreciate if you could add this shirt to the "Basic" outfit.
Material
This product uses COOL DOTS®, which has 4-way stretch (stretch both vertically and horizontally). COOL DOTS® is a high-performance material developed by Komatsu Matere Co., Ltd. that is made of 100% polyester with countless microscopic air holes and has excellent stretch and breathability.
*This is a lighter and more advanced material with smaller micropores than the COOL DOTS® used in the Poly Basic Long Sleeve Shirt, which was sold until 2022.
Excellent breathability has been achieved through a special weaving method that creates numerous micropores. It maintains excellent breathability from the inside of the shirt while reducing the sense of transparency when worn.
"Stretchy/Lightweight"
It uses two types of special stretch yarns with different shrinkage rates to achieve high stretchability in all 360° directions. Not only is it lightweight at 104g/㎡, but it also has high wrinkle resistance. Even if it is crumpled and stuffed into a backpack pocket, it quickly recovers its shape.
"Quick drying and UV protection"
The quick-drying feature that dries quickly even if it gets wet is an important feature when hiking, and of course this fabric also has this feature. In addition, it also has UV protection.
"Durability"
Friction test in dry and wet conditions.
"Environmental Consideration"
Lycra T400® fiber, a plant-derived thread, is used in part of the stretch system.
Design
Yusuke Kurosawa tried to create a basic design that can be worn everyday without any discomfort. It has a relaxing silhouette that is moderately away from the body line. It's a shirt with a simple design, but with fine details.
“Round edge”
It is easily affected by wear, so Yusuke Kurosawa designed it to eliminate sharp edge as much as possible.
“Top collar”
It is also assumed to be worn with the upper collar up. The top collar design can reduces the stress that the tip of the collar hits the neck as much as possible.
“Chest pocket body and flap edge”
These parts are made into as small a round shape as possible. These places usually have sharp edges. Therefore, it is susceptible to wear and tear, and fraying is often noticeable. It is made into a small round to prevent wear even a little. Yusuke san is very careful when sewing small rounds. The pitch of the seams is reduced, which requires more hand movements, and it is very difficult to get a nice finish.
“Small collar set ”
The base collar and upper collar of this shirt are low and small. The pattern is set so that the upper collar sticks to the neck line when worn with the upper collar upright.
“Sleeves with momentum in the armpits”
The armholes are large enough to secure enough momentum at the side when raising the arms.
“Folding stitch”
All seams are sewn with felled seams. The felled seam is a method of sewing by folding the fabric so that the edge seam allowance is not visible. It takes a lot of time and effort to sew, but it is durable. On the other hand, if the seam allowance is processed with a lock sewing machine, nails may get caught in the thread, which may lead to unraveling.
“Snap button”
All buttons use resin snap buttons (YKK PLANCER®). You don't have to worry about losing the button due to thread breakage like with normal sewing buttons.
“Hanger loop”
A hanger loop is provided at the base of the back collar band. The hanger loop is a traditional shirt detail.
“Countermeasure against static electricity”
A special discharge tape is sewn into the garment to suppress the static electricity that tends to occur with clothing made of thin chemical fibers (nylon, polyester, etc.). (*From “Poly Basic Long Sleeve Shirt” which will be on sale from 2023)
Discharge tape was developed as a measure to reduce electrostatic voltage that has a negative effect on the human body. Discharge tape does not prevent static electricity, but by lowering the static voltage through discharge, it prevents the discomfort caused by static electricity. By installing it, it will not interfere with equipment such as mobile phones and computers. What's more, it has the effect of keeping pollen and dust out of the vicinity during discharge.
Collaborator
The factory that produces RIDGE MOUNTAIN GEAR shirts is Fashion Kobo Kuroishi Co., Ltd. Fashion Studio Kuroishi is a factory with about 50 employees located in Kuroishi City, Aomori Prefecture. Established in 2004. It is a factory that specializes in sewing shirts, and sews shirts from famous domestic manufacturers throughout the year. It produce about 60,000 shirts per year.
Attention
There is no big difference in the overall silhouette between the men's size (Men) and the women's size (Women), but the women's size (Women) has a silhouette that more closely matches the body shape of women, such as length and sleeve length.
This product can be used for a long time if you pay attention to the following care guide.
・ Please use a neutral detergent for washing.
・ Put the product inside out and put it in the laundry net.
・ The water temperature is limited to 40 ℃, and please avoid washing with boiling water.
・ Avoid tumble drying.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Material: 100% polyester
Color: Sage Green / Coast Grey / Tawny Brown / Indigo Blue
Size:
(Men) S, M, L, XL
(Women) S, M, L
Weight: Men / M Approx. 185g
Country of Origin: Japan
Producer: 青森県黒石市 有限会社ファッション工房黒石
Introduction
RIDGE MOUNTAIN GEAR "Basic" line shirt.
There is a product called "Basic Cap". The brand owner Yusuke Kurosawa aimed to make this shirt that he would like to wear all year long.
The concept of RIDGE MOUNTAIN GEAR is "Do not separate everyday life from mountains". The “Basic Long Sleeve Shirt” could be fully deliver such concept. We would appreciate if you could add this shirt to the "Basic" outfit.
Material
This product uses COOL DOTS®, which has 4-way stretch (stretch both vertically and horizontally). COOL DOTS® is a high-performance material developed by Komatsu Matere Co., Ltd. that is made of 100% polyester with countless microscopic air holes and has excellent stretch and breathability.
*This is a lighter and more advanced material with smaller micropores than the COOL DOTS® used in the Poly Basic Long Sleeve Shirt, which was sold until 2022.
Excellent breathability has been achieved through a special weaving method that creates numerous micropores. It maintains excellent breathability from the inside of the shirt while reducing the sense of transparency when worn.
"Stretchy/Lightweight"
It uses two types of special stretch yarns with different shrinkage rates to achieve high stretchability in all 360° directions. Not only is it lightweight at 104g/㎡, but it also has high wrinkle resistance. Even if it is crumpled and stuffed into a backpack pocket, it quickly recovers its shape.
"Quick drying and UV protection"
The quick-drying feature that dries quickly even if it gets wet is an important feature when hiking, and of course this fabric also has this feature. In addition, it also has UV protection.
"Durability"
Friction test in dry and wet conditions.
"Environmental Consideration"
Lycra T400® fiber, a plant-derived thread, is used in part of the stretch system.
Design
Yusuke Kurosawa tried to create a basic design that can be worn everyday without any discomfort. It has a relaxing silhouette that is moderately away from the body line. It's a shirt with a simple design, but with fine details.
“Round edge”
It is easily affected by wear, so Yusuke Kurosawa designed it to eliminate sharp edge as much as possible.
“Top collar”
It is also assumed to be worn with the upper collar up. The top collar design can reduces the stress that the tip of the collar hits the neck as much as possible.
“Chest pocket body and flap edge”
These parts are made into as small a round shape as possible. These places usually have sharp edges. Therefore, it is susceptible to wear and tear, and fraying is often noticeable. It is made into a small round to prevent wear even a little. Yusuke san is very careful when sewing small rounds. The pitch of the seams is reduced, which requires more hand movements, and it is very difficult to get a nice finish.
“Small collar set ”
The base collar and upper collar of this shirt are low and small. The pattern is set so that the upper collar sticks to the neck line when worn with the upper collar upright.
“Sleeves with momentum in the armpits”
The armholes are large enough to secure enough momentum at the side when raising the arms.
“Folding stitch”
All seams are sewn with felled seams. The felled seam is a method of sewing by folding the fabric so that the edge seam allowance is not visible. It takes a lot of time and effort to sew, but it is durable. On the other hand, if the seam allowance is processed with a lock sewing machine, nails may get caught in the thread, which may lead to unraveling.
“Snap button”
All buttons use resin snap buttons (YKK PLANCER®). You don't have to worry about losing the button due to thread breakage like with normal sewing buttons.
“Hanger loop”
A hanger loop is provided at the base of the back collar band. The hanger loop is a traditional shirt detail.
“Countermeasure against static electricity”
A special discharge tape is sewn into the garment to suppress the static electricity that tends to occur with clothing made of thin chemical fibers (nylon, polyester, etc.). (*From “Poly Basic Long Sleeve Shirt” which will be on sale from 2023)
Discharge tape was developed as a measure to reduce electrostatic voltage that has a negative effect on the human body. Discharge tape does not prevent static electricity, but by lowering the static voltage through discharge, it prevents the discomfort caused by static electricity. By installing it, it will not interfere with equipment such as mobile phones and computers. What's more, it has the effect of keeping pollen and dust out of the vicinity during discharge.
Collaborator
The factory that produces RIDGE MOUNTAIN GEAR shirts is Fashion Kobo Kuroishi Co., Ltd. Fashion Studio Kuroishi is a factory with about 50 employees located in Kuroishi City, Aomori Prefecture. Established in 2004. It is a factory that specializes in sewing shirts, and sews shirts from famous domestic manufacturers throughout the year. It produce about 60,000 shirts per year.
Attention
There is no big difference in the overall silhouette between the men's size (Men) and the women's size (Women), but the women's size (Women) has a silhouette that more closely matches the body shape of women, such as length and sleeve length.
This product can be used for a long time if you pay attention to the following care guide.
・ Please use a neutral detergent for washing.
・ Put the product inside out and put it in the laundry net.
・ The water temperature is limited to 40 ℃, and please avoid washing with boiling water.
・ Avoid tumble drying.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori