Ridge Mountain Gear Boa Fleece Pullover
Spec
Material: 100% Polyester (Polartec® Thermal Pro®)
Size:
S, M, L, XL (Men)
S, M, L (Women)
Color: Whale Gray / Camel Beige / Black
Weight: Men / M about 330g
Country of Origin: Japan
Producer: Tokyo Pio Aomori Factory Co., Ltd.
Material
This product uses Polartec® Thermal Pro®. The surface has a unique expression with "boa processing". Fluffy surface fibers like sheep's wool trap air and retain body temperature. Thermal Pro® is also highly breathable. Disperses and releases hot air and steam from the body, and disperses and takes in cold air from the outside.
Introduction
Yusuke San made this because he wanted to wear a simple boa fleece pullover with a thick atmosphere. RIDGE MOUNTAIN GEAR also makes so-called "everyday wear". He want to eliminate the gap between everyday life and mountains.
"Boa Fleece Pullover" is comfortable to wear. Even if you wear it every day until you go to bed, you can relax without worrying about it. If you buy it, please wear it and try to sleep. Depending on how you wear it, this one piece can be used as a mid layer or an outer layer. It's designed as a pullover, so it's suitable for everyday wear that doesn't need to be put on and taken off frequently, or for light hiking in cool weather.
Design
A pullover with a simple box silhouette and a half-zip fastener with a relaxed fit. The front has a slightly deeper half-zip opening and a kangaroo pocket on the stomach.
The stand collar is the most important part of this product. At first glance, it looks like a normal stand collar, but it is different. For the collar part, Yusuke San have adopted the "moon waist collar" that is often used in the collar of stainless collar coats. As a result, it is slightly different from a normal stand-up collar, and is devised so that even when the collar is folded, it sticks to the neck and folds neatly.
You can create a look like a roll collar by lifting the zipper all the way up and lowering the back collar.
The cuffs and hem have built-in soft flat rubber. The size cannot be adjusted, but it has a moderate fit that adapts to each size.
The shoulder line, sleeve line, and side line are all flat-seamed. A "flat seamer" is a specification that uses a special sewing machine to sew together the fabrics. As the name suggests, the seams of the fabric are very flat and reduce stress on the skin as much as possible. This method is often used for sportswear and baby wear, as the seams are also durable.
Regarding hair loss at the start of wearing
Due to the characteristics of the fabric of this product, hair loss will occur when you start wearing it. Loose hairs may stick to the tape of the backpack or sacoche. Thank you for your understanding. This symptom will subside after wearing and washing several times.
Regarding washing synthetic fleece products
We recommend using a special laundry net when washing synthetic fleece. Washing Bag prevents microplastic fibers from entering rivers and oceans when washing synthetic fabrics. By using the washing bag, the fibers discharged after washing gather in the corners of this bag and can be easily removed.
Attention
・Please turn the product inside out and put it in a laundry net and wash it separately.
・The water temperature should be limited to 40°C, and avoid washing with hot water.
・Use a neutral detergent and do not use bleach or fabric softener.
・Avoid tumble drying.
・Dry cleaning is not allowed.
・Do not iron.
・After dehydration, we recommend reshaping and drying in the shade.
Collaborator
Tokyo PiO Aomori Factory Co., Ltd. is located in Tsugaru City, Aomori Prefecture. Tokyo Pio Co., Ltd. was founded in Sumida Ward in 1971 as a small company where two people did everything from sewing to delivery. After that, the number of orders gradually increased, and from the Showa era to the Heisei era, they produced many products for major apparel and department stores, but as the times changed, overseas products that were made cheaply increased. They are still researching high quality with pride in building, accumulated technology and confidence.
Aomori Factory is a factory that mainly sews cut-and-sews, but also sews some other fabric products. There are many special sewing machines for sewing cut-and-sews. Not every cut and sew factory can sew this flat seam. Many factories do not have this sewing machine, and it takes skill to actually operate the sewing machine. The fact is the craftsman has left and the flatseamer cannot be operated now.
Pio Aomori Factory, which is also the base of their own sewing factory in Japan, started operations in 1999 with the aim of revitalizing local industry and employment after receiving an invitation from Kizomachi, Aomori Prefecture.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Spec
Material: 100% Polyester (Polartec® Thermal Pro®)
Size:
S, M, L, XL (Men)
S, M, L (Women)
Color: Whale Gray / Camel Beige / Black
Weight: Men / M about 330g
Country of Origin: Japan
Producer: Tokyo Pio Aomori Factory Co., Ltd.
Material
This product uses Polartec® Thermal Pro®. The surface has a unique expression with "boa processing". Fluffy surface fibers like sheep's wool trap air and retain body temperature. Thermal Pro® is also highly breathable. Disperses and releases hot air and steam from the body, and disperses and takes in cold air from the outside.
Introduction
Yusuke San made this because he wanted to wear a simple boa fleece pullover with a thick atmosphere. RIDGE MOUNTAIN GEAR also makes so-called "everyday wear". He want to eliminate the gap between everyday life and mountains.
"Boa Fleece Pullover" is comfortable to wear. Even if you wear it every day until you go to bed, you can relax without worrying about it. If you buy it, please wear it and try to sleep. Depending on how you wear it, this one piece can be used as a mid layer or an outer layer. It's designed as a pullover, so it's suitable for everyday wear that doesn't need to be put on and taken off frequently, or for light hiking in cool weather.
Design
A pullover with a simple box silhouette and a half-zip fastener with a relaxed fit. The front has a slightly deeper half-zip opening and a kangaroo pocket on the stomach.
The stand collar is the most important part of this product. At first glance, it looks like a normal stand collar, but it is different. For the collar part, Yusuke San have adopted the "moon waist collar" that is often used in the collar of stainless collar coats. As a result, it is slightly different from a normal stand-up collar, and is devised so that even when the collar is folded, it sticks to the neck and folds neatly.
You can create a look like a roll collar by lifting the zipper all the way up and lowering the back collar.
The cuffs and hem have built-in soft flat rubber. The size cannot be adjusted, but it has a moderate fit that adapts to each size.
The shoulder line, sleeve line, and side line are all flat-seamed. A "flat seamer" is a specification that uses a special sewing machine to sew together the fabrics. As the name suggests, the seams of the fabric are very flat and reduce stress on the skin as much as possible. This method is often used for sportswear and baby wear, as the seams are also durable.
Regarding hair loss at the start of wearing
Due to the characteristics of the fabric of this product, hair loss will occur when you start wearing it. Loose hairs may stick to the tape of the backpack or sacoche. Thank you for your understanding. This symptom will subside after wearing and washing several times.
Regarding washing synthetic fleece products
We recommend using a special laundry net when washing synthetic fleece. Washing Bag prevents microplastic fibers from entering rivers and oceans when washing synthetic fabrics. By using the washing bag, the fibers discharged after washing gather in the corners of this bag and can be easily removed.
Attention
・Please turn the product inside out and put it in a laundry net and wash it separately.
・The water temperature should be limited to 40°C, and avoid washing with hot water.
・Use a neutral detergent and do not use bleach or fabric softener.
・Avoid tumble drying.
・Dry cleaning is not allowed.
・Do not iron.
・After dehydration, we recommend reshaping and drying in the shade.
Collaborator
Tokyo PiO Aomori Factory Co., Ltd. is located in Tsugaru City, Aomori Prefecture. Tokyo Pio Co., Ltd. was founded in Sumida Ward in 1971 as a small company where two people did everything from sewing to delivery. After that, the number of orders gradually increased, and from the Showa era to the Heisei era, they produced many products for major apparel and department stores, but as the times changed, overseas products that were made cheaply increased. They are still researching high quality with pride in building, accumulated technology and confidence.
Aomori Factory is a factory that mainly sews cut-and-sews, but also sews some other fabric products. There are many special sewing machines for sewing cut-and-sews. Not every cut and sew factory can sew this flat seam. Many factories do not have this sewing machine, and it takes skill to actually operate the sewing machine. The fact is the craftsman has left and the flatseamer cannot be operated now.
Pio Aomori Factory, which is also the base of their own sewing factory in Japan, started operations in 1999 with the aim of revitalizing local industry and employment after receiving an invitation from Kizomachi, Aomori Prefecture.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
Spec
Material: 100% Polyester (Polartec® Thermal Pro®)
Size:
S, M, L, XL (Men)
S, M, L (Women)
Color: Whale Gray / Camel Beige / Black
Weight: Men / M about 330g
Country of Origin: Japan
Producer: Tokyo Pio Aomori Factory Co., Ltd.
Material
This product uses Polartec® Thermal Pro®. The surface has a unique expression with "boa processing". Fluffy surface fibers like sheep's wool trap air and retain body temperature. Thermal Pro® is also highly breathable. Disperses and releases hot air and steam from the body, and disperses and takes in cold air from the outside.
Introduction
Yusuke San made this because he wanted to wear a simple boa fleece pullover with a thick atmosphere. RIDGE MOUNTAIN GEAR also makes so-called "everyday wear". He want to eliminate the gap between everyday life and mountains.
"Boa Fleece Pullover" is comfortable to wear. Even if you wear it every day until you go to bed, you can relax without worrying about it. If you buy it, please wear it and try to sleep. Depending on how you wear it, this one piece can be used as a mid layer or an outer layer. It's designed as a pullover, so it's suitable for everyday wear that doesn't need to be put on and taken off frequently, or for light hiking in cool weather.
Design
A pullover with a simple box silhouette and a half-zip fastener with a relaxed fit. The front has a slightly deeper half-zip opening and a kangaroo pocket on the stomach.
The stand collar is the most important part of this product. At first glance, it looks like a normal stand collar, but it is different. For the collar part, Yusuke San have adopted the "moon waist collar" that is often used in the collar of stainless collar coats. As a result, it is slightly different from a normal stand-up collar, and is devised so that even when the collar is folded, it sticks to the neck and folds neatly.
You can create a look like a roll collar by lifting the zipper all the way up and lowering the back collar.
The cuffs and hem have built-in soft flat rubber. The size cannot be adjusted, but it has a moderate fit that adapts to each size.
The shoulder line, sleeve line, and side line are all flat-seamed. A "flat seamer" is a specification that uses a special sewing machine to sew together the fabrics. As the name suggests, the seams of the fabric are very flat and reduce stress on the skin as much as possible. This method is often used for sportswear and baby wear, as the seams are also durable.
Regarding hair loss at the start of wearing
Due to the characteristics of the fabric of this product, hair loss will occur when you start wearing it. Loose hairs may stick to the tape of the backpack or sacoche. Thank you for your understanding. This symptom will subside after wearing and washing several times.
Regarding washing synthetic fleece products
We recommend using a special laundry net when washing synthetic fleece. Washing Bag prevents microplastic fibers from entering rivers and oceans when washing synthetic fabrics. By using the washing bag, the fibers discharged after washing gather in the corners of this bag and can be easily removed.
Attention
・Please turn the product inside out and put it in a laundry net and wash it separately.
・The water temperature should be limited to 40°C, and avoid washing with hot water.
・Use a neutral detergent and do not use bleach or fabric softener.
・Avoid tumble drying.
・Dry cleaning is not allowed.
・Do not iron.
・After dehydration, we recommend reshaping and drying in the shade.
Collaborator
Tokyo PiO Aomori Factory Co., Ltd. is located in Tsugaru City, Aomori Prefecture. Tokyo Pio Co., Ltd. was founded in Sumida Ward in 1971 as a small company where two people did everything from sewing to delivery. After that, the number of orders gradually increased, and from the Showa era to the Heisei era, they produced many products for major apparel and department stores, but as the times changed, overseas products that were made cheaply increased. They are still researching high quality with pride in building, accumulated technology and confidence.
Aomori Factory is a factory that mainly sews cut-and-sews, but also sews some other fabric products. There are many special sewing machines for sewing cut-and-sews. Not every cut and sew factory can sew this flat seam. Many factories do not have this sewing machine, and it takes skill to actually operate the sewing machine. The fact is the craftsman has left and the flatseamer cannot be operated now.
Pio Aomori Factory, which is also the base of their own sewing factory in Japan, started operations in 1999 with the aim of revitalizing local industry and employment after receiving an invitation from Kizomachi, Aomori Prefecture.
Credit: photos and description from Ridge Mountain Gear official website (https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori