Ridge Mountain Gear Enough Hat NT
Material: 100% Polyester and 100% Polyester for the sweat stopper
Size: One size Depth approx. 16 cm (when placed flat), Brim length approx. 6.5 cm (front), head circumference approx. 60 cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product. If you actually wear it, it will spread a little.
Colors: Black / Coast grey / Sage green / Tawny brown
Weight: Approximately 47g
Country of Origin: Japan
Producer: Shimada Co., Ltd. , Kanonji City, Kagawa Prefecture
Material:
The body of the Enough Hat is made of Toray's Stunner®, a 100% nylon material that is water repellent, windproof and permeable. It prevents discomfort caused by sweating while preventing rain and wind, and has excellent durable water repellent function.
Although it is a synthetic fiber, in addition to a natural look like a cotton blend, the coating on the back side realizes a moderately firm texture.
COOLMAX® fabric is used for the sweat-stopper part. It is made of 100% polyester, which is like Kanoko-shaped polyester, and has the functions of water absorption, quick drying, and UV protection (UPF 40+).
Introduction:
Enough Hat NT is used "COOL DOTS®" which is used in "Basic Long Sleeve Shirt". It is the same design with the "Enough Hat".
Walking along the ridgeline of the highlands or walking along the ridgeline where the weather was nice for a few hours with a normal cap will easily cause sunburn on the ears because of the exposure of the ears.
With that in mind, Yusuke Kurosawa made a "just right" brim hat based on the Basic Cap. The best feature of this hat is the shape of the brim. In a normal hat, the brim is open on average, but this "Enough Hat" could be adjusted the opening of the brim in three places: front, side, and back.
Based on "Enough Hat" , Yusuke Kurosawa changed the material of the head part to mesh material so that it can be comfortably worn even in summer while maintaining the same size. The design of the main body part is a basic 6 piece joint. The two parts of the hiss and forehead are made of the same material as the Enough Hat, but only the fourth part of the head is made of mesh material.
The front side has a curved shape that resembles the cap's eaves. The side is just barely open to cover your ears. It is set short so that it will not open too much afterwards and will not be affected by the wind. It is also a feature that you can wear it in several ways.
Raise the front side of the brim when the sunlight is low or when you want to secure a wide field of view in front of you. If you raise the back of the brim, you can wear it in a cap-like Tyrolean hat.
Size Guide:
If you compare the Basic Cap and the Enough Hat, you will feel that the Enough Hat is a little shallower. This is because Enough Hat tries to keep the tilt of the brim from hitting the ear as much as possible.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
Material: 100% Polyester and 100% Polyester for the sweat stopper
Size: One size Depth approx. 16 cm (when placed flat), Brim length approx. 6.5 cm (front), head circumference approx. 60 cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product. If you actually wear it, it will spread a little.
Colors: Black / Coast grey / Sage green / Tawny brown
Weight: Approximately 47g
Country of Origin: Japan
Producer: Shimada Co., Ltd. , Kanonji City, Kagawa Prefecture
Material:
The body of the Enough Hat is made of Toray's Stunner®, a 100% nylon material that is water repellent, windproof and permeable. It prevents discomfort caused by sweating while preventing rain and wind, and has excellent durable water repellent function.
Although it is a synthetic fiber, in addition to a natural look like a cotton blend, the coating on the back side realizes a moderately firm texture.
COOLMAX® fabric is used for the sweat-stopper part. It is made of 100% polyester, which is like Kanoko-shaped polyester, and has the functions of water absorption, quick drying, and UV protection (UPF 40+).
Introduction:
Enough Hat NT is used "COOL DOTS®" which is used in "Basic Long Sleeve Shirt". It is the same design with the "Enough Hat".
Walking along the ridgeline of the highlands or walking along the ridgeline where the weather was nice for a few hours with a normal cap will easily cause sunburn on the ears because of the exposure of the ears.
With that in mind, Yusuke Kurosawa made a "just right" brim hat based on the Basic Cap. The best feature of this hat is the shape of the brim. In a normal hat, the brim is open on average, but this "Enough Hat" could be adjusted the opening of the brim in three places: front, side, and back.
Based on "Enough Hat" , Yusuke Kurosawa changed the material of the head part to mesh material so that it can be comfortably worn even in summer while maintaining the same size. The design of the main body part is a basic 6 piece joint. The two parts of the hiss and forehead are made of the same material as the Enough Hat, but only the fourth part of the head is made of mesh material.
The front side has a curved shape that resembles the cap's eaves. The side is just barely open to cover your ears. It is set short so that it will not open too much afterwards and will not be affected by the wind. It is also a feature that you can wear it in several ways.
Raise the front side of the brim when the sunlight is low or when you want to secure a wide field of view in front of you. If you raise the back of the brim, you can wear it in a cap-like Tyrolean hat.
Size Guide:
If you compare the Basic Cap and the Enough Hat, you will feel that the Enough Hat is a little shallower. This is because Enough Hat tries to keep the tilt of the brim from hitting the ear as much as possible.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori
Material: 100% Polyester and 100% Polyester for the sweat stopper
Size: One size Depth approx. 16 cm (when placed flat), Brim length approx. 6.5 cm (front), head circumference approx. 60 cm (adjustable with rubber)
* There may be an difference of ± 1 cm in the rising size of the product. If you actually wear it, it will spread a little.
Colors: Black / Coast grey / Sage green / Tawny brown
Weight: Approximately 47g
Country of Origin: Japan
Producer: Shimada Co., Ltd. , Kanonji City, Kagawa Prefecture
Material:
The body of the Enough Hat is made of Toray's Stunner®, a 100% nylon material that is water repellent, windproof and permeable. It prevents discomfort caused by sweating while preventing rain and wind, and has excellent durable water repellent function.
Although it is a synthetic fiber, in addition to a natural look like a cotton blend, the coating on the back side realizes a moderately firm texture.
COOLMAX® fabric is used for the sweat-stopper part. It is made of 100% polyester, which is like Kanoko-shaped polyester, and has the functions of water absorption, quick drying, and UV protection (UPF 40+).
Introduction:
Enough Hat NT is used "COOL DOTS®" which is used in "Basic Long Sleeve Shirt". It is the same design with the "Enough Hat".
Walking along the ridgeline of the highlands or walking along the ridgeline where the weather was nice for a few hours with a normal cap will easily cause sunburn on the ears because of the exposure of the ears.
With that in mind, Yusuke Kurosawa made a "just right" brim hat based on the Basic Cap. The best feature of this hat is the shape of the brim. In a normal hat, the brim is open on average, but this "Enough Hat" could be adjusted the opening of the brim in three places: front, side, and back.
Based on "Enough Hat" , Yusuke Kurosawa changed the material of the head part to mesh material so that it can be comfortably worn even in summer while maintaining the same size. The design of the main body part is a basic 6 piece joint. The two parts of the hiss and forehead are made of the same material as the Enough Hat, but only the fourth part of the head is made of mesh material.
The front side has a curved shape that resembles the cap's eaves. The side is just barely open to cover your ears. It is set short so that it will not open too much afterwards and will not be affected by the wind. It is also a feature that you can wear it in several ways.
Raise the front side of the brim when the sunlight is low or when you want to secure a wide field of view in front of you. If you raise the back of the brim, you can wear it in a cap-like Tyrolean hat.
Size Guide:
If you compare the Basic Cap and the Enough Hat, you will feel that the Enough Hat is a little shallower. This is because Enough Hat tries to keep the tilt of the brim from hitting the ear as much as possible.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated by morimori