Ridge Mountain Gear Travel Pouch Plus
SPEC
Material : Dyneema® CT5K.18/wov.32c / Challenge Sailcloth ULTRA™ 100X
Surface: 50 denier polyester (73% polyester, 27% polyethylene) / A blend of 100-denier ultra PE and high-strength polyester
Middle Layer: Polyethylene Fiber (UHMWPE Fiber) / 45-degree ultra PE cross-ply
Back side: polyester film / 0.75 mil recycled PET film
Size: Approximately 14cm long x 19.5cm wide x 4cm bottom
Weight: about 14g
Country of Origin: Japan
Material
"Dyneema® CT5K.18/wov.32c" is used for the material.
This material is composed of 50 denier polyester on the surface + 0°/90° UHMWPE (*1) fiber in the middle layer + polyester film on the back. It is a material that is lightweight, durable, and extremely waterproof (20,000 mm water pressure resistance).
(*1) UHMWPE is an abbreviation for Ultra High Molecular Weight Polyethylene, which indicates ultra-high molecular weight polyethylene. Ultra-high-molecular-weight polyethylene is a polyethylene classified as an engineering plastic with an average molecular weight of 1 million or more, excellent lubricity, abrasion resistance, and high strength.
It also have the "Challenge Sailcloth ULTRA™ 100X" version.
The Challenge ULTRA™ fabric line is made from the highest-performing UHMWPE composite materials in the world. ULTRA™ represents a new and unparalleled paradigm in durability and lightweight performance.
The weave of ULTRA™ is composed of an optimal blend of UHMWPE and high-strength polyester. This high-density weave is laminated using an eco-friendly adhesive with the revolutionary Challenge RUV™ film, resulting in a textile that is extremely strong and lightweight, while also offering waterproof performance up to 200 psi.
ULTRA™ delivers exceptional performance in all climates, from harsh, freezing environments to tropical regions.
Challenge ULTRA™ is the ultimate form of ultralight pack fabric, built strong enough to withstand use in the most demanding backpacks and duffel bags.
Introduction
A pouch for subdividing and carrying various gear. There is a 0.5cm width polypropylene tape hand loop on the left side, so it can be hooked when taking it out of a rucksack or bag, or you can open and close it very smoothly by grasping it when opening the zipper. It is also convenient to carry by itself. The zipper slider part has a polyester puller.
It has loops on both ends of the top. It can also be used as a simple shoulder pouch by using the "Shoulder Strap Tough". "Shoulder Strap Tough" sold separately. (https://www.morimori.live/shop/p/ridge-mountain-gear-shoulder-strap-tough)
The zipper uses YKK AquaGuard®. A polyurethane laminate is applied to the zipper surface, making it a zipper with excellent water stopping. Although it is designed to prevent water from entering, it is not completely waterproof. For tools that you do not want to get wet, use a S size Ziplock® freezer bag as an inner bag can be stored perfectly.
The material used for this product, Dyneema® Composite Fabrics Hybrid 2.92 oz/yd 2, is characterized by the more it is used, the more it becomes wrinkled and softer. Wrinkles are added and the overall shrinkage makes the zipper wavy. The gusset on the bottom will also lose the creases and the corners will be removed and rounded. Of course you can still use it and it will change more.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
SPEC
Material : Dyneema® CT5K.18/wov.32c / Challenge Sailcloth ULTRA™ 100X
Surface: 50 denier polyester (73% polyester, 27% polyethylene) / A blend of 100-denier ultra PE and high-strength polyester
Middle Layer: Polyethylene Fiber (UHMWPE Fiber) / 45-degree ultra PE cross-ply
Back side: polyester film / 0.75 mil recycled PET film
Size: Approximately 14cm long x 19.5cm wide x 4cm bottom
Weight: about 14g
Country of Origin: Japan
Material
"Dyneema® CT5K.18/wov.32c" is used for the material.
This material is composed of 50 denier polyester on the surface + 0°/90° UHMWPE (*1) fiber in the middle layer + polyester film on the back. It is a material that is lightweight, durable, and extremely waterproof (20,000 mm water pressure resistance).
(*1) UHMWPE is an abbreviation for Ultra High Molecular Weight Polyethylene, which indicates ultra-high molecular weight polyethylene. Ultra-high-molecular-weight polyethylene is a polyethylene classified as an engineering plastic with an average molecular weight of 1 million or more, excellent lubricity, abrasion resistance, and high strength.
It also have the "Challenge Sailcloth ULTRA™ 100X" version.
The Challenge ULTRA™ fabric line is made from the highest-performing UHMWPE composite materials in the world. ULTRA™ represents a new and unparalleled paradigm in durability and lightweight performance.
The weave of ULTRA™ is composed of an optimal blend of UHMWPE and high-strength polyester. This high-density weave is laminated using an eco-friendly adhesive with the revolutionary Challenge RUV™ film, resulting in a textile that is extremely strong and lightweight, while also offering waterproof performance up to 200 psi.
ULTRA™ delivers exceptional performance in all climates, from harsh, freezing environments to tropical regions.
Challenge ULTRA™ is the ultimate form of ultralight pack fabric, built strong enough to withstand use in the most demanding backpacks and duffel bags.
Introduction
A pouch for subdividing and carrying various gear. There is a 0.5cm width polypropylene tape hand loop on the left side, so it can be hooked when taking it out of a rucksack or bag, or you can open and close it very smoothly by grasping it when opening the zipper. It is also convenient to carry by itself. The zipper slider part has a polyester puller.
It has loops on both ends of the top. It can also be used as a simple shoulder pouch by using the "Shoulder Strap Tough". "Shoulder Strap Tough" sold separately. (https://www.morimori.live/shop/p/ridge-mountain-gear-shoulder-strap-tough)
The zipper uses YKK AquaGuard®. A polyurethane laminate is applied to the zipper surface, making it a zipper with excellent water stopping. Although it is designed to prevent water from entering, it is not completely waterproof. For tools that you do not want to get wet, use a S size Ziplock® freezer bag as an inner bag can be stored perfectly.
The material used for this product, Dyneema® Composite Fabrics Hybrid 2.92 oz/yd 2, is characterized by the more it is used, the more it becomes wrinkled and softer. Wrinkles are added and the overall shrinkage makes the zipper wavy. The gusset on the bottom will also lose the creases and the corners will be removed and rounded. Of course you can still use it and it will change more.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori
SPEC
Material : Dyneema® CT5K.18/wov.32c / Challenge Sailcloth ULTRA™ 100X
Surface: 50 denier polyester (73% polyester, 27% polyethylene) / A blend of 100-denier ultra PE and high-strength polyester
Middle Layer: Polyethylene Fiber (UHMWPE Fiber) / 45-degree ultra PE cross-ply
Back side: polyester film / 0.75 mil recycled PET film
Size: Approximately 14cm long x 19.5cm wide x 4cm bottom
Weight: about 14g
Country of Origin: Japan
Material
"Dyneema® CT5K.18/wov.32c" is used for the material.
This material is composed of 50 denier polyester on the surface + 0°/90° UHMWPE (*1) fiber in the middle layer + polyester film on the back. It is a material that is lightweight, durable, and extremely waterproof (20,000 mm water pressure resistance).
(*1) UHMWPE is an abbreviation for Ultra High Molecular Weight Polyethylene, which indicates ultra-high molecular weight polyethylene. Ultra-high-molecular-weight polyethylene is a polyethylene classified as an engineering plastic with an average molecular weight of 1 million or more, excellent lubricity, abrasion resistance, and high strength.
It also have the "Challenge Sailcloth ULTRA™ 100X" version.
The Challenge ULTRA™ fabric line is made from the highest-performing UHMWPE composite materials in the world. ULTRA™ represents a new and unparalleled paradigm in durability and lightweight performance.
The weave of ULTRA™ is composed of an optimal blend of UHMWPE and high-strength polyester. This high-density weave is laminated using an eco-friendly adhesive with the revolutionary Challenge RUV™ film, resulting in a textile that is extremely strong and lightweight, while also offering waterproof performance up to 200 psi.
ULTRA™ delivers exceptional performance in all climates, from harsh, freezing environments to tropical regions.
Challenge ULTRA™ is the ultimate form of ultralight pack fabric, built strong enough to withstand use in the most demanding backpacks and duffel bags.
Introduction
A pouch for subdividing and carrying various gear. There is a 0.5cm width polypropylene tape hand loop on the left side, so it can be hooked when taking it out of a rucksack or bag, or you can open and close it very smoothly by grasping it when opening the zipper. It is also convenient to carry by itself. The zipper slider part has a polyester puller.
It has loops on both ends of the top. It can also be used as a simple shoulder pouch by using the "Shoulder Strap Tough". "Shoulder Strap Tough" sold separately. (https://www.morimori.live/shop/p/ridge-mountain-gear-shoulder-strap-tough)
The zipper uses YKK AquaGuard®. A polyurethane laminate is applied to the zipper surface, making it a zipper with excellent water stopping. Although it is designed to prevent water from entering, it is not completely waterproof. For tools that you do not want to get wet, use a S size Ziplock® freezer bag as an inner bag can be stored perfectly.
The material used for this product, Dyneema® Composite Fabrics Hybrid 2.92 oz/yd 2, is characterized by the more it is used, the more it becomes wrinkled and softer. Wrinkles are added and the overall shrinkage makes the zipper wavy. The gusset on the bottom will also lose the creases and the corners will be removed and rounded. Of course you can still use it and it will change more.
*photo credit: Ridge Mountain Gear official website(https://www.ridge-mountaingear.com/)
*Product information translated and written by morimori